CCW_DEVICE_START(9) The ccw bus CCW_DEVICE_START(9)
NAME ccw_device_start - start a s390 channel program
SYNOPSIS int ccw_device_start(struct ccw_device * cdev, struct ccw1 * cpa, unsigned long intparm, __u8 lpm, unsigned long flags);
ARGUMENTS cdev target ccw device
cpa logical start address of channel program
intparm user specific interruption parameter; will be presented back to cdev´s interrupt handler. Allows a device driver to associate the interrupt with a particular I/O request.
lpm defines the channel path to be used for a specific I/O request. A value of 0 will make cio use the opm.
flags additional flags; defines the action to be performed for I/O processing.
DESCRIPTION Start a S/390 channel program. When the interrupt arrives, the IRQ handler is called, either immediately, delayed (dev-end missing, or sense required) or never (no IRQ handler registered).
RETURNS 0, if the operation was successful; -EBUSY, if the device is busy, or status pending; -EACCES, if no path specified in lpm is operational; -ENODEV, if the device is not operational.
CONTEXT Interrupts disabled, ccw device lock held
AUTHOR Cornelia Huck <firstname.lastname@example.org> Author.
COPYRIGHT Kernel Hackers Manual 2.6. July 2015 CCW_DEVICE_START(9)