FENCE_AGENT(8) FENCE_AGENT(8)

NAME fence_cisco_ucs - Fence agent for Cisco UCS

DESCRIPTION fence_cisco_ucs is an I/O Fencing agent which can be used with Cisco UCS to fence machines.

fence_cisco_ucs accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_cisco_ucs can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.cisco.com

PARAMETERS

-o, --action=[action] Fencing Action (Default Value: reboot)

-4, --inet4-only Forces agent to use IPv4 addresses only

-6, --inet6-only Forces agent to use IPv6 addresses only

-a, --ip=[ip] IP Address or Hostname This parameter is always required.

-u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 80)

-l, --username=[name] Login Name This parameter is always required.

-t, --notls Disable TLS negotiation, force SSL 3.0 (Default Value: 1)

-p, --password=[password] Login password or passphrase

-S, --password-script=[script] Script to retrieve password

-n, --plug=[id] Physical plug number, name of virtual machine or UUID This parameter is always required.

-z, --ssl SSL connection

--ssl-insecure SSL connection without verifying fence devices certificate

--ssl-secure SSL connection with verifying fence device s certificate

--suborg=[path] Additional path needed to access suborganization (Default Value: )

-v, --verbose Verbose mode

-D, --debug-file=[debugfile] Write debug information to given file

-V, --version Display version information and exit

-h, --help Display help and exit

-C, --separator=[char] Separator for CSV created by operation list (Default Value: ,)

--delay=[seconds] Wait X seconds before fencing is started (Default Value: 0)

--login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5)

--power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--retry-on=[attempts] Count of attempts to retry power on (Default Value: 1)

--gnutlscli-path=[path] Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS

on Power on machine.

off Power off machine.

reboot Reboot machine.

status This returns the status of the plug/virtual machine.

list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

monitor Check the health of fence device

metadata Display the XML metadata describing this resource.

STDIN PARAMETERS

action Fencing Action (Default Value: reboot)

inet4_only Forces agent to use IPv4 addresses only

inet6_only Forces agent to use IPv6 addresses only

ipaddr IP Address or Hostname This parameter is always required.

ipport TCP/UDP port to use for connection with device (Default Value: 80)

login Login Name This parameter is always required.

notls Disable TLS negotiation, force SSL 3.0 (Default Value: 1)

passwd Login password or passphrase

passwd_script Script to retrieve password

port Physical plug number, name of virtual machine or UUID This parameter is always required.

ssl SSL connection

ssl_insecure SSL connection without verifying fence devices certificate

ssl_secure SSL connection with verifying fence device s certificate

suborg Additional path needed to access suborganization (Default Value: )

verbose Verbose mode

debug Write debug information to given file

version Display version information and exit

help Display help and exit

separator Separator for CSV created by operation list (Default Value: ,)

delay Wait X seconds before fencing is started (Default Value: 0)

login_timeout Wait X seconds for cmd prompt after login (Default Value: 5)

power_timeout Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3)

retry_on Count of attempts to retry power on (Default Value: 1)

gnutlscli_path Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

fence_cisco_ucs (Fence Agent) 2009-10-20 FENCE_AGENT(8)