CONMAN.CONF(5) LLNL CONMAN.CONF(5)
NAME conman.conf - ConMan daemon configuration file
DESCRIPTION The conman.conf configuration file is used to specify the consoles being managed by conmand.
Comments are introduced by a hash sign (#), and continue until the end of the line. Blank lines and white-space are ignored. Directives are terminated by a newline, but may span multiple lines by escaping it (ie, immediately preceding the newline with a backslash). Strings may be either single-quoted or double-quoted, but they may not contain new- lines. Keywords are case-insensitive.
SERVER DIRECTIVES These directives begin with the SERVER keyword followed by one of the following key/value pairs:
keepalive = (on|off) Specifies whether the daemon will use TCP keep-alives for detecting dead connections. The default is on.
logdir = "directory" Specifies a directory prefix for log files that are not defined via an absolute pathname.
logfile = "file[,priority]" Specifies the file to which log messages are appended. This string undergoes conversion specifier expansion (cf, CONVERSION SPECIFICATIONS). If an absolute pathname is not specified, the files location is relative to logdir (assuming it has been pre- viously defined). This file will be created if it does not already exist. The filename may optionally be followed by a comma and a minimum priority at which messages will be logged. Refer to syslog.conf(5) for a list of priorities. The default priority is info. If this keyword is used in conjunction with the syslog keyword, messages will be sent to both locations.
loopback = (on|off) Specifies whether the daemon will bind its socket to the loop- back address, thereby only accepting local client connections directed to that address (127.0.0.1). The default is off.
pidfile = "file" Specifies the file to which the daemons PID is written. The use of a pidfile is recommended if you want to use the daemons -k, -q, or -r options.
port = integer Specifies the port on which the daemon will listen for client connections.
resetcmd = "string" Specifies a command string to be invoked by a subshell upon receipt of the client s "reset" escape. Multiple commands within a string may be separated with semicolons. This string undergoes conversion specifier expansion (cf, CONVERSION SPECI- FICATIONS) and will be invoked multiple times if the client is connected to multiple consoles.
syslog = "facility" Specifies that log messages are to be sent to the system logger (syslogd) at the given facility. Refer to syslog.conf(5) for a list of facilities. If this keyword is used in conjunction with the logfile keyword, messages will be sent to both locations.
tcpwrappers = (on|off) Specifies whether the daemon will use TCP-Wrappers when accept- ing client connections. Support for this feature must be enabled at compile-time (via configure s "--with-tcp-wrappers" option). Refer to hosts_access(5) and hosts_options(5) for more details. The default is off.
timestamp = integer (m|h|d) Specifies the interval between timestamps written to the indi- vidual console log files. The interval is an integer that may be followed by a single-character modifier; m for minutes (the default), h for hours, or d for days. The default is 0 (ie, no timestamps).
GLOBAL DIRECTIVES These directives begin with the GLOBAL keyword followed by one of the following key/value pairs:
log = "file" Specifies the default log file to use for each console direc- tive. This string undergoes conversion specifier expansion (cf, CONVERSION SPECIFICATIONS) and must contain either %N or %D. If an absolute pathname is not given, the file s location is relative to logdir (assuming it has been previously defined).
logopts = "(sanitize|nosanitize),(timestamp|notimestamp)" Specifies global options for the console log files. These options can be overridden on an per-console basis by specifying the CONSOLE logopts keyword. Note that options affecting the output of the console s logfile also affect the output of the consoles log-replay escape. The valid logoptions include the following:
sanitize or nosanitize - sanitized log files convert non-print- able characters into 7-bit printable characters.
timestamp or notimestamp - timestamped logs prepend each line of console output with a timestamp in "YYYY-MM-DD HH:MM:SS" format. This timestamp is generated when the first character following the line break is output.
The default is "nosanitize,notimestamp".
seropts = "bps[,databits[parity[stopbits]]]" Specifies global options for local serial devices. These options can be overridden on an per-console basis by specifying the CONSOLE seropts keyword.
bps is an integer specifying the baud rate in bits-per-second. If this exact value is not supported by the system, it will be rounded down to the next supported value.
databits is an integer from 5-8.
parity is a single case-insensitive character: n for none, o for odd, and e for even.
stopbits is an integer from 1-2.
The default is "9600,8n1" for 9600 bps, 8 data bits, no parity, and 1 stop bit.
CONSOLE DIRECTIVES This directive defines an individual console being managed by the dae- mon. The CONSOLE keyword is followed by one or more of the following key/value pairs:
name = "string" Specifies the name used by clients to refer to the console. This keyword is required.
dev = "string" Specifies the location of the device. A local serial-port con- nection is specified with the pathname of the tty device. A remote terminal-server connection is specified with the "host:port" format (where host is either a hostname or IP address). This keyword is required.
log = "file" Specifies the file where console output is logged. This string undergoes conversion specifier expansion (cf, CONVERSION SPECI- FICATIONS). If an absolute pathname is not given, the files location is relative to logdir (assuming it has been previously defined). An empty log string (ie, log="") disables logging, overriding the global log name.
logopts = "string" This keyword is optional (cf, GLOBAL DIRECTIVES).
seropts = "string" This keyword is optional (cf, GLOBAL DIRECTIVES).
CONVERSION SPECIFICATIONS A conversion specifier is a two-character sequence beginning with a % character. The second character in the sequence specifies the type of conversion to be applied. The following specifiers are supported:
%N The console name (from the name string).
%D The console device basename (from the dev string), with leading directory components removed.
%P The daemons process identifier.
%Y The year as a 4-digit number with the century.
%y The year as a 2-digit number without the century.
%m The month as a 2-digit number (01-12).
%d The day of the month as a 2-digit number (01-31).
%H The hour as a 2-digit number using a 24-hour clock (00-23).
%M The minute as a 2-digit number (00-59).
%S The seconds as a 2-digit number (00-61).
%s The number of seconds since the Epoch.
%% A literal % character.
The console name (%N) and device (%D) specifiers are "sanitized" in that non-printable characters and the forward-slash (/) character are replaced with underscores.
AUTHOR Chris Dunlap <firstname.lastname@example.org>
COPYRIGHT Copyright (C) 2001-2006 by the Regents of the University of California. Produced at Lawrence Livermore National Laboratory. UCRL- CODE-2002-009.
ConMan is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation.
SEE ALSO conman(1), conmand(8).
The ConMan FTP site: ftp://ftp.llnl.gov/pub/linux/conman/
The ConMan Web page: http://www.llnl.gov/linux/conman/
conman-0.1.9.2 2006-06-26 CONMAN.CONF(5)