FENCE_AGENT(8) FENCE_AGENT(8)

NAME fence_ilo_ssh - Fence agent for HP iLO over SSH

fence_ilo3_ssh - Fence agent for HP iLO3 over SSH (symlink)

fence_ilo4_ssh - Fence agent for HP iLO4 over SSH (symlink)

DESCRIPTION fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet.

fence_ilo_ssh accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo_ssh can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.hp.com

PARAMETERS

-o, --action=[action] Fencing Action (Default Value: reboot)

-c, --command-prompt=[prompt] Force Python regex for command prompt (Default Value: [MP>, hpiLO->])

-k, --identity-file=[filename] Identity file for ssh

-4, --inet4-only Forces agent to use IPv4 addresses only

-6, --inet6-only Forces agent to use IPv6 addresses only

-a, --ip=[ip] IP Address or Hostname This parameter is always required.

-u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 23)

-l, --username=[name] Login Name This parameter is always required.

-m, --method=[method] Method to fence (onoff|cycle) (Default Value: onoff)

-p, --password=[password] Login password or passphrase

-S, --password-script=[script] Script to retrieve password

-x, --ssh SSH connection

--ssh-options=[options] SSH options to use

-v, --verbose Verbose mode

-D, --debug-file=[debugfile] Write debug information to given file

-V, --version Display version information and exit

-h, --help Display help and exit

--delay=[seconds] Wait X seconds before fencing is started (Default Value: 0)

--login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5)

--power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 5)

--shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--retry-on=[attempts] Count of attempts to retry power on (Default Value: 1)

--ssh-path=[path] Path to ssh binary (Default Value: /usr/bin/ssh)

--telnet-path=[path] Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS

on Power on machine.

off Power off machine.

reboot Reboot machine.

status This returns the status of the plug/virtual machine.

list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

list-status List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.

monitor Check the health of fence device

metadata Display the XML metadata describing this resource.

STDIN PARAMETERS

action Fencing Action (Default Value: reboot)

cmd_prompt Force Python regex for command prompt (Default Value: [MP>, hpiLO->])

identity_file Identity file for ssh

inet4_only Forces agent to use IPv4 addresses only

inet6_only Forces agent to use IPv6 addresses only

ipaddr IP Address or Hostname This parameter is always required.

ipport TCP/UDP port to use for connection with device (Default Value: 23)

login Login Name This parameter is always required.

method Method to fence (onoff|cycle) (Default Value: onoff)

passwd Login password or passphrase

passwd_script Script to retrieve password

secure SSH connection

ssh_options SSH options to use

verbose Verbose mode

debug Write debug information to given file

version Display version information and exit

help Display help and exit

delay Wait X seconds before fencing is started (Default Value: 0)

login_timeout Wait X seconds for cmd prompt after login (Default Value: 5)

power_timeout Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait Wait X seconds after issuing ON/OFF (Default Value: 5)

shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3)

retry_on Count of attempts to retry power on (Default Value: 1)

ssh_path Path to ssh binary (Default Value: /usr/bin/ssh)

telnet_path Path to telnet binary (Default Value: /usr/bin/telnet)

fence_ilo_ssh (Fence Agent) 2009-10-20 FENCE_AGENT(8)