FENCE_AGENT(8) FENCE_AGENT(8)

NAME fence_ilo - Fence agent for HP iLO

fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION fence_ilo is an I/O Fencing agent used for HP servers with the Inte- grated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.

fence_ilo accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo can be run by itself with command line options. This is use- ful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.hp.com

PARAMETERS

-o, --action=[action] Fencing Action (Default Value: reboot)

-4, --inet4-only Forces agent to use IPv4 addresses only

-6, --inet6-only Forces agent to use IPv6 addresses only

-a, --ip=[ip] IP Address or Hostname This parameter is always required.

-u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 443)

-l, --username=[name] Login Name This parameter is always required.

-t, --notls Disable TLS negotiation, force SSL 3.0 (Default Value: 1)

-p, --password=[password] Login password or passphrase

-S, --password-script=[script] Script to retrieve password

-r, --ribcl-version=[version] Force ribcl version to use

-z, --ssl SSL connection (Default Value: 1)

--ssl-insecure SSL connection without verifying fence devices certificate

--ssl-secure SSL connection with verifying fence device s certificate

--tls1.0 Disable TLS negotiaton, force TLS 1.0

-v, --verbose Verbose mode

-D, --debug-file=[debugfile] Write debug information to given file

-V, --version Display version information and exit

-h, --help Display help and exit

--delay=[seconds] Wait X seconds before fencing is started (Default Value: 0)

--login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 10)

--power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--retry-on=[attempts] Count of attempts to retry power on (Default Value: 3)

--gnutlscli-path=[path] Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS

on Power on machine.

off Power off machine.

reboot Reboot machine.

status This returns the status of the plug/virtual machine.

list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

list-status List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.

monitor Check the health of fence device

metadata Display the XML metadata describing this resource.

STDIN PARAMETERS

action Fencing Action (Default Value: reboot)

inet4_only Forces agent to use IPv4 addresses only

inet6_only Forces agent to use IPv6 addresses only

ipaddr IP Address or Hostname This parameter is always required.

ipport TCP/UDP port to use for connection with device (Default Value: 443)

login Login Name This parameter is always required.

notls Disable TLS negotiation, force SSL 3.0 (Default Value: 1)

passwd Login password or passphrase

passwd_script Script to retrieve password

ribcl Force ribcl version to use

ssl SSL connection (Default Value: 1)

ssl_insecure SSL connection without verifying fence devices certificate

ssl_secure SSL connection with verifying fence device s certificate

tls1.0 Disable TLS negotiaton, force TLS 1.0

verbose Verbose mode

debug Write debug information to given file

version Display version information and exit

help Display help and exit

delay Wait X seconds before fencing is started (Default Value: 0)

login_timeout Wait X seconds for cmd prompt after login (Default Value: 10)

power_timeout Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3)

retry_on Count of attempts to retry power on (Default Value: 3)

gnutlscli_path Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

fence_ilo (Fence Agent) 2009-10-20 FENCE_AGENT(8)