FENCE_AGENT(8) FENCE_AGENT(8)

NAME fence_drac - fencing agent for Dell Remote Access Card

DESCRIPTION fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC). This card provides remote access to control- ling power to a server. It logs into the DRAC through the telnet inter- face of the card. By default, the telnet interface is not enabled. To enable the interface, you will need to use the racadm command in the racser-devel rpm available from Dell. To enable telnet on the DRAC:

[root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1

[root]# racadm racreset

fence_drac accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_drac can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.dell.com

PARAMETERS -o [action] Fencing Action (Default Value: reboot)

-a [ip] IP Address or Hostname This parameter is always required.

-l [name] Login Name This parameter is always required.

-p [password] Login password or passphrase

-S [script] Script to retrieve password

-c [prompt] Force fence_drac to use cmd_prompt as the command prompt

-d [version] Force fence_drac to treat the device as though it was for the specified drac version

-m [modulename] The module name of the blade when using DRAC/MC firmware.

-D [dumpfile] Debug file of the telnet interaction

-f [seconds] Wait X seconds before fencing is started (Default Value: 0)

-h Display help and exit

ACTIONS on Power on machine.

off Power off machine.

reboot Reboot machine.

status This returns the status of the plug/virtual machine.

metadata Display the XML metadata describing this resource.

STDIN PARAMETERS action Fencing Action (Default Value: reboot)

ipaddr IP Address or Hostname This parameter is always required.

login Login Name This parameter is always required.

passwd Login password or passphrase

passwd_script Script to retrieve password

cmd_prompt Force fence_drac to use cmd_prompt as the command prompt

drac_version Force fence_drac to treat the device as though it was for the specified drac version

module_name The module name of the blade when using DRAC/MC firmware.

debug Debug file of the telnet interaction

delay Wait X seconds before fencing is started (Default Value: 0)

help Display help and exit

fence_drac (Fence Agent) 2009-10-20 FENCE_AGENT(8)