dcc_client_selinux(8) SELinux Policy dcc_client dcc_client_selinux(8)

NAME dcc_client_selinux - Security Enhanced Linux Policy for the dcc_client processes

DESCRIPTION Security-Enhanced Linux secures the dcc_client processes via flexible mandatory access control.

The dcc_client processes execute with the dcc_client_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep dcc_client_t

ENTRYPOINTS The dcc_client_t SELinux type can be entered via the dcc_client_exec_t file type.

The default entrypoint paths for the dcc_client_t domain are the fol- lowing:

/usr/bin/dccproc

PROCESS TYPES SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to ps

Policy governs the access confined processes have to files. SELinux dcc_client policy is very flexible allowing users to setup their dcc_client processes in as secure a method as possible.

The following process types are defined for dcc_client:

dcc_client_t

Note: semanage permissive -a dcc_client_t can be used to make the pro- cess type dcc_client_t permissive. SELinux does not deny access to per- missive process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS SELinux policy is customizable based on least access required. dcc_client policy is extremely flexible and has several booleans that allow you to manipulate the policy and run dcc_client with the tightest access possible.

If you want to allow all domains to use other domains file descriptors, you must turn on the allow_domain_fd_use boolean. Enabled by default.

setsebool -P allow_domain_fd_use 1

If you want to allow confined applications to run with kerberos, you must turn on the allow_kerberos boolean. Enabled by default.

setsebool -P allow_kerberos 1

If you want to allow sysadm to debug or ptrace all processes, you must turn on the allow_ptrace boolean. Disabled by default.

setsebool -P allow_ptrace 1

If you want to allow system to run with NIS, you must turn on the allow_ypbind boolean. Disabled by default.

setsebool -P allow_ypbind 1

If you want to allow all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by default.

setsebool -P domain_kernel_load_modules 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

setsebool -P global_ssp 1

If you want to allow confined applications to use nscd shared memory, you must turn on the nscd_use_shm boolean. Enabled by default.

setsebool -P nscd_use_shm 1

MANAGED FILES The SELinux process type dcc_client_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

dcc_client_map_t

/etc/dcc/map /var/dcc/map /var/lib/dcc/map /var/run/dcc/map

dcc_client_tmp_t

dcc_var_t

/etc/dcc(/.*)? /var/dcc(/.*)? /var/lib/dcc(/.*)?

initrc_tmp_t

mnt_t

/mnt(/[^/]*) /mnt(/[^/]*)? /rhev(/[^/]*)? /media(/[^/]*) /media(/[^/]*)? /etc/rhgb(/.*)? /media/.hal-.* /net /afs /rhev /misc

tmp_t

/tmp /usr/tmp /var/tmp /tmp-inst /var/tmp-inst /var/tmp/vi.recover

FILE CONTEXTS SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to ls

Policy governs the access confined processes have to these files. SELinux dcc_client policy is very flexible allowing users to setup their dcc_client processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the dcc_client, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t dcc_client_tmp_t /srv/mydcc_client_con- tent(/.*)? restorecon -R -v /srv/mydcc_client_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for dcc_client:

dcc_client_exec_t

- Set files with the dcc_client_exec_t type, if you want to transition an executable to the dcc_client_t domain.

dcc_client_map_t

- Set files with the dcc_client_map_t type, if you want to treat the files as dcc client map data.

Paths: /etc/dcc/map, /var/dcc/map, /var/lib/dcc/map, /var/run/dcc/map

dcc_client_tmp_t

- Set files with the dcc_client_tmp_t type, if you want to store dcc client temporary files in the /tmp directories.

Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

COMMANDS semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove pol- icy modules.

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux pol- icy settings.

AUTHOR This manual page was auto-generated using sepolicy manpage .

SEE ALSO selinux(8), dcc_client(8), semanage(8), restorecon(8), chcon(1) , set- sebool(8)

dcc_client 15-06-03 dcc_client_selinux(8)