CCW_DEVICE_START_TIM(9) The ccw bus CCW_DEVICE_START_TIM(9)

NAME ccw_device_start_timeout_key - start a s390 channel program with timeout and key

SYNOPSIS int ccw_device_start_timeout_key(struct ccw_device * cdev, struct ccw1 * cpa, unsigned long intparm, __u8 lpm, __u8 key, unsigned long flags, int expires);

ARGUMENTS cdev target ccw device

cpa logical start address of channel program

intparm user specific interruption parameter; will be presented back to cdev´s interrupt handler. Allows a device driver to associate the interrupt with a particular I/O request.

lpm defines the channel path to be used for a specific I/O request. A value of 0 will make cio use the opm.

key storage key to be used for the I/O

flags additional flags; defines the action to be performed for I/O processing.

expires timeout value in jiffies

DESCRIPTION Start a S/390 channel program. When the interrupt arrives, the IRQ handler is called, either immediately, delayed (dev-end missing, or sense required) or never (no IRQ handler registered). This function notifies the device driver if the channel program has not completed during the time specified by expires. If a timeout occurs, the channel program is terminated via xsch, hsch or csch, and the device´s interrupt handler will be called with an irb containing ERR_PTR(-ETIMEDOUT).

RETURNS 0, if the operation was successful; -EBUSY, if the device is busy, or status pending; -EACCES, if no path specified in lpm is operational; -ENODEV, if the device is not operational.

CONTEXT Interrupts disabled, ccw device lock held

AUTHOR Cornelia Huck <cornelia.huck@de.ibm.com> Author.

COPYRIGHT Kernel Hackers Manual 2.6. September 2014 CCW_DEVICE_START_TIM(9)