apcupsd_selinux(8) SELinux Policy apcupsd apcupsd_selinux(8)
NAME apcupsd_selinux - Security Enhanced Linux Policy for the apcupsd pro- cesses
DESCRIPTION Security-Enhanced Linux secures the apcupsd processes via flexible mandatory access control.
The apcupsd processes execute with the apcupsd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.
ps -eZ | grep apcupsd_t
ENTRYPOINTS The apcupsd_t SELinux type can be entered via the apcupsd_exec_t file type.
The default entrypoint paths for the apcupsd_t domain are the follow- ing:
PROCESS TYPES SELinux defines process types (domains) for each process running on the system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux apcupsd policy is very flexible allowing users to setup their apcupsd processes in as secure a method as possible.
The following process types are defined for apcupsd:
Note: semanage permissive -a apcupsd_t can be used to make the process type apcupsd_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still gener- ated.
BOOLEANS SELinux policy is customizable based on least access required. apcupsd policy is extremely flexible and has several booleans that allow you to manipulate the policy and run apcupsd with the tightest access possi- ble.
If you want to allow all daemons to write corefiles to /, you must turn on the allow_daemons_dump_core boolean. Disabled by default.
setsebool -P allow_daemons_dump_core 1
If you want to allow all daemons to use tcp wrappers, you must turn on the allow_daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P allow_daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals, you must turn on the allow_daemons_use_tty boolean. Disabled by default.
setsebool -P allow_daemons_use_tty 1
If you want to allow all domains to use other domains file descriptors, you must turn on the allow_domain_fd_use boolean. Enabled by default.
setsebool -P allow_domain_fd_use 1
If you want to allow sysadm to debug or ptrace all processes, you must turn on the allow_ptrace boolean. Disabled by default.
setsebool -P allow_ptrace 1
If you want to allow all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to enable support for upstart as the init program, you must turn on the init_upstart boolean. Enabled by default.
setsebool -P init_upstart 1
PORT TYPES SELinux defines port types to represent TCP and UDP ports.
You can see the types associated with a port by using the following command:
semanage port -l
Policy governs the access confined processes have to these ports. SELinux apcupsd policy is very flexible allowing users to setup their apcupsd processes in as secure a method as possible.
The following port types are defined for apcupsd:
Default Defined Ports: tcp 3551 udp 3551
MANAGED FILES The SELinux process type apcupsd_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.
/[^/]+ /etc/mtab.* /etc/blkid(/.*)? /etc/nologin.* /etc/smartd.conf.* /etc/.fstab.hal..+ /etc/sysconfig/ip6?tables.save /halt /etc/motd /fastboot /poweroff /etc/issue /etc/cmtab /forcefsck /.autofsck /.suspended /fsckoptions /etc/HOSTNAME /.autorelabel /etc/securetty /etc/nohotplug /etc/issue.net /etc/killpower /etc/ioctl.save /etc/reader.conf /etc/fstab.REVOKE /etc/mtab.fuselock /etc/network/ifstate /etc/sysconfig/hwconf /etc/ptal/ptal-printd-like /etc/xorg.conf.d/00-system-setup-keyboard.conf
/var/run/utmp /var/run/random-seed /var/run/runlevel.dir /var/run/setmixer_flag
FILE CONTEXTS SELinux requires files to have an extended attribute to define the file type.
You can see the context of a file using the -Z option to ls
Policy governs the access confined processes have to these files. SELinux apcupsd policy is very flexible allowing users to setup their apcupsd processes in as secure a method as possible.
STANDARD FILE CONTEXT
SELinux defines the file context types for the apcupsd, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.
semanage fcontext -a -t apcupsd_exec_t /srv/apcupsd/content(/.*)? restorecon -R -v /srv/myapcupsd_content
Note: SELinux often uses regular expressions to specify labels that match multiple files.
The following file types are defined for apcupsd:
- Set files with the apcupsd_exec_t type, if you want to transition an executable to the apcupsd_t domain.
Paths: /sbin/apcupsd, /usr/sbin/apcupsd
- Set files with the apcupsd_initrc_exec_t type, if you want to transi- tion an executable to the apcupsd_initrc_t domain.
- Set files with the apcupsd_lock_t type, if you want to treat the files as apcupsd lock data, stored under the /var/lock directory
- Set files with the apcupsd_log_t type, if you want to treat the data as apcupsd log data, usually stored under the /var/log directory.
Paths: /var/log/apcupsd.events.*, /var/log/apcupsd.status.*
- Set files with the apcupsd_tmp_t type, if you want to store apcupsd temporary files in the /tmp directories.
- Set files with the apcupsd_var_run_t type, if you want to store the apcupsd files under the /run or /var/run directory.
Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.
COMMANDS semanage fcontext can also be used to manipulate default file context mappings.
semanage permissive can also be used to manipulate whether or not a process type is permissive.
semanage module can also be used to enable/disable/install/remove pol- icy modules.
semanage port can also be used to manipulate the port definitions
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux pol- icy settings.
AUTHOR This manual page was auto-generated using sepolicy manpage .
SEE ALSO selinux(8), apcupsd(8), semanage(8), restorecon(8), chcon(1) , setse- bool(8)
apcupsd 13-09-27 apcupsd_selinux(8)