default.conf(5) FreeIPA Manual Pages default.conf(5)
NAME default.conf - IPA configuration file
SYNOPSIS /etc/ipa/default.conf, ~/.ipa/default.conf, /etc/ipa/server.conf, /etc/ipa/cli.conf
DESCRIPTION The default.conf configuration file is used to set system-wide defaults to be applied when running IPA clients and servers.
Users may create an optional configuration file in ~/.ipa/default.conf which will be merged into the system-wide defaults file.
The following files are read, in order: ~/.ipa/default.conf /etc/ipa/<context>.conf /etc/ipa/default.conf built-in constants
The IPA server does not read ~/.ipa/default.conf.
The first setting wins.
SYNTAX The configuration options are not case sensitive. The values may be case sensitive, depending on the option.
Blank lines are ignored. Lines beginning with # are comments and are ignored.
Valid lines consist of an option name, an equals sign and a value. Spaces surrounding equals sign are ignored. An option terminates at the end of a line.
Values should not be quoted, the quotes will not be stripped.
# Wrong - dont include quotes verbose = "True"
# Right - Properly formatted options verbose = True verbose=True
Options must appear in the section named [global]. There are no other sections defined or used currently.
Options may be defined that are not used by IPA. Be careful of mis- spellings, they will not be rejected.
OPTIONS The following options are relevant for the server:
basedn <base> Specifies the base DN to use when performing LDAP operations. The base must be in DN format (dc=example,dc=com).
ca_agent_port <port> Specifies the secure CA agent port. The default is 9443 for Dog- tag 9, and 8443 for Dogtag 10.
ca_ee_port <port> Specifies the secure CA end user port. The default is 9444 for Dogtag 9, and 8443 for Dogtag 10.
ca_host <hostname> Specifies the hostname of the dogtag CA server. The default is the hostname of the IPA server.
ca_port <port> Specifies the insecure CA end user port. The default is 9180 for Dogtag 9, and 8080 for Dogtag 10.
context <context> Specifies the context that IPA is being executed in. IPA may operate differently depending on the context. The current defined contexts are cli and server. Additionally this value is used to load /etc/ipa/context.conf to provide context-specific configuration. For example, if you want to always perform client requests in verbose mode but do not want to have verbose enabled on the server, add the verbose option to /etc/ipa/cli.conf.
debug <boolean> When True provides detailed information. Specifically this set the global log level to "debug". Default is False.
dogtag_version <version> Stores the version of Dogtag. Value 9 is assumed if not speci- fied otherwise.
domain <domain> The domain of the IPA server e.g. example.com.
enable_ra <boolean> Specifies whether the CA is acting as an RA agent, such as when dogtag is being used as the Certificate Authority. This setting only applies to the IPA server configuration.
fallback <boolean> Specifies whether an IPA client should attempt to fall back and try other services if the first connection fails.
host <hostname> Specifies the hostname of the IPA server. This value is used to construct URL values on the client and server.
in_server <boolean> Specifies whether requests should be forwarded to an IPA server or handled locally. This is used internally by IPA in a similar way as context. The same IPA framework is used by the ipa com- mand-line tool and the server. This setting tells the framework whether it should execute the command as if on the server or forward it via XML-RPC to a remote server.
in_tree <boolean> This is used in development and is generally a detected value. It means that the code is being executed within a source tree.
interactive <boolean> Specifies whether values should be prompted for or not. The default is True.
ldap_uri <URI> Specifies the URI of the IPA LDAP server to connect to. The URI scheme may be one of ldap or ldapi. The default is to use ldapi, e.g. ldapi://%2fvar%2frun%2fslapd-EXAMPLE-COM.socket
log_logger_XXX <comma separated list of regexps> loggers matching regexp will be assigned XXX level.
Logger levels can be explicitly specified for specific loggers as opposed to a global logging level. Specific loggers are indicated by a list of regular expressions bound to a level. If a logger s name matches the regexp then it is assigned that level. This config item must begin with "log_logger_level_" and then be followed by a symbolic or numeric log level, for exam- ple:
log_logger_level_debug = ipalib.dn..*
log_logger_level_35 = ipalib.plugins.dogtag
The first line says any logger belonging to the ipalib.dn module will have its level configured to debug.
The second line say the ipa.plugins.dogtag logger will be con- figured to level 35.
This config item is useful when you only want to see the log output from one or more selected loggers. Turning on the global debug flag will produce an enormous amount of output. This allows you to leave the global debug flag off and selectively enable output from a specific logger. Typically loggers are bound to classes and plugins.
Note: logger names are a dot (.) separated list forming a path in the logger tree. The dot character is also a regular expres- sion metacharacter (matches any character) therefore you will usually need to escape the dot in the logger names by preceeding it with a backslash.
mode <mode> Specifies the mode the server is running in. The currently sup- port values are production and development. When running in pro- duction mode some self-tests are skipped to improve performance.
mount_ipa <URI> Specifies the mount point that the development server will reg- ister. The default is /ipa/
prompt_all <boolean> Specifies that all options should be prompted for in the IPA client, even optional values. Default is False.
ra_plugin <name> Specifies the name of the CA back end to use. The current options are selfsign and dogtag. This is a server-side setting. Changing this value is not recommended as the CA back end is only set up during initial installation.
realm <realm> Specifies the Kerberos realm.
session_auth_duration <time duration spec> Specifies the length of time authentication credentials cached in the session are valid. After the duration expires credentials will be automatically reacquired. Examples are "2 hours", "1h:30m", "10 minutes", "5min, 30sec".
session_duration_type <inactivity_timeout|from_start> Specifies how the expiration of a session is computed. With inactivity_timeout the expiration time is advanced by the value of session_auth_duration everytime the user accesses the ser- vice. With from_start the session expiration is the start of the user s session plus the value of session_auth_duration.
server <hostname> Specifies the IPA Server hostname. This option is deprecated.
startup_timeout <time in seconds> Controls the amount of time waited when starting a service. The default value is 120 seconds.
startup_traceback <boolean> If the IPA server fails to start and this value is True the server will attempt to generate a python traceback to make iden- tifying the underlying problem easier.
validate_api <boolean> Used internally in the IPA source package to verify that the API has not changed. This is used to prevent regressions. If it is true then some errors are ignored so enough of the IPA framework can be loaded to verify all of the API, even if optional compo- nents are not installed. The default is False.
verbose <boolean> When True provides more information. Specifically this sets the global log level to "info".
wait_for_attr <boolean> Debug option. Waits for asynchronous execution of 389-ds postop- eration plugins before returning data to the client, therefore data added by postoperation plugins is included in the result. Increases execution time.
xmlrpc_uri <URI> Specifies the URI of the XML-RPC server for a client. This is used by IPA and some external tools as well, such as ipa-getcert. e.g. https://ipa.example.com/ipa/xml
The following define the containers for the IPA server. Containers define where in the DIT that objects can be found. The full location is the value of container + basedn. container_accounts: cn=accounts container_applications: cn=applications,cn=configs,cn=policies container_automount: cn=automount container_configs: cn=configs,cn=policies container_dns: cn=dns container_entitlements: cn=entitlements,cn=etc container_group: cn=groups,cn=accounts container_hbac: cn=hbac container_hbacservice: cn=hbacservices,cn=hbac container_hbacservicegroup: cn=hbacservicegroups,cn=hbac container_host: cn=computers,cn=accounts container_hostgroup: cn=hostgroups,cn=accounts container_netgroup: cn=ng,cn=alt container_permission: cn=permissions,cn=pbac container_policies: cn=policies container_policygroups: cn=policygroups,cn=configs,cn=policies container_policylinks: cn=policylinks,cn=configs,cn=policies container_privilege: cn=privileges,cn=pbac container_rolegroup: cn=roles,cn=accounts container_roles: cn=roles,cn=policies container_service: cn=services,cn=accounts container_sudocmd: cn=sudocmds,cn=sudo container_sudocmdgroup: cn=sudocmdgroups,cn=sudo container_sudorule: cn=sudorules,cn=sudo container_user: cn=users,cn=accounts container_virtual: cn=virtual operations,cn=etc
FILES /etc/ipa/default.conf system-wide IPA configuration file
$HOME/.ipa/default.conf user IPA configuration file
It is also possible to define context-specific configuration files. The context is set when the IPA api is initialized. The two currently defined contexts in IPA are cli and server. This is helpful, for exam- ple, if you only want debug enabled on the server and not in the client. If this is set to True in default.conf it will affect both the ipa client tool and the IPA server. If it is only set in server.conf then only the server will have debug set. These files will be loaded if they exist:
/etc/ipa/cli.conf system-wide IPA client configuration file
/etc/ipa/server.conf system-wide IPA server configuration file
SEE ALSO ipa(1)
FreeIPA Feb 21 2011 default.conf(5)