FENCE_AGENT(8) FENCE_AGENT(8)

NAME fence_intelmodular - Fence agent for Intel Modular

DESCRIPTION fence_intelmodular is an I/O Fencing agent which can be used with Intel Modular device (tested on Intel MFSYS25, should work with MFSYS35 as well).

Note: Since firmware update version 2.7, SNMP v2 write support is removed, and replaced by SNMP v3 support. So agent now has default SNMP version 3. If you are using older firmware, please supply -d for com- mand line and snmp_version option for your cluster.conf.

fence_intelmodular accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_intelmodular can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.intel.com

PARAMETERS

-o, --action=<action> Fencing Action (Default Value: reboot)

-a, --ip=<ip> IP Address or Hostname This parameter is always required.

-l, --username=<name> Login Name

-p, --password=<password> Login password or passphrase

-S, --password-script=<script> Script to retrieve password

-n, --plug=<id> Physical plug number or name of virtual machine This parameter is always required.

-d, --snmp-version=<ver> Specifies SNMP version to use (1,2c,3)

-c, --community=<community> Set the community string

-b, --snmp-auth-prot=<prot> Set authentication protocol (MD5|SHA)

-E, --snmp-sec-level=<level> Set security level (noAuthNoPriv|authNoPriv|authPriv)

-B, --snmp-priv-prot=<prot> Set privacy protocol (DES|AES)

-P, --snmp-priv-passwd=<pass> Set privacy protocol password

-R, --snmp-priv-passwd-script Script to run to retrieve privacy password

-u, --udpport UDP/TCP port to use for connection with device (Default Value: 161)

-4, --inet4-only Forces agent to use IPv4 addresses only

-6, --inet6-only Forces agent to use IPv6 addresses only

-v, --verbose Verbose mode

-D, --debug-file=<debugfile> Write debug information to given file

-V, --version Display version information and exit

-h, --help Display help and exit

-C, --separator=<char> Separator for CSV created by operation list (Default Value: ,)

--power-timeout Test X seconds for status change after ON/OFF (Default Value: 20)

--shell-timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--login-timeout Wait X seconds for cmd prompt after login (Default Value: 5)

--power-wait Wait X seconds after issuing ON/OFF (Default Value: 0)

--delay Wait X seconds before fencing is started (Default Value: 0)

--retry-on Count of attempts to retry power on (Default Value: 1)

ACTIONS

on Power on machine.

off Power off machine.

reboot Reboot machine.

status This returns the status of the plug/virtual machine.

list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

monitor Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).

metadata The operational behavior of this is not known.

STDIN PARAMETERS

action Fencing Action (Default Value: reboot)

ipaddr IP Address or Hostname This parameter is always required.

login Login Name

passwd Login password or passphrase

passwd_script Script to retrieve password

port Physical plug number or name of virtual machine This parameter is always required.

snmp_version Specifies SNMP version to use (1,2c,3)

community Set the community string

snmp_auth_prot Set authentication protocol (MD5|SHA)

snmp_sec_level Set security level (noAuthNoPriv|authNoPriv|authPriv)

snmp_priv_prot Set privacy protocol (DES|AES)

snmp_priv_passwd Set privacy protocol password

snmp_priv_passwd_script Script to run to retrieve privacy password

udpport UDP/TCP port to use for connection with device (Default Value: 161)

inet4_only Forces agent to use IPv4 addresses only

inet6_only Forces agent to use IPv6 addresses only

verbose Verbose mode

debug Write debug information to given file

version Display version information and exit

help Display help and exit

separator Separator for CSV created by operation list (Default Value: ,)

power_timeout Test X seconds for status change after ON/OFF (Default Value: 20)

shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3)

login_timeout Wait X seconds for cmd prompt after login (Default Value: 5)

power_wait Wait X seconds after issuing ON/OFF (Default Value: 0)

delay Wait X seconds before fencing is started (Default Value: 0)

retry_on Count of attempts to retry power on (Default Value: 1)

fence_intelmodular (Fence Agent) 2009-10-20 FENCE_AGENT(8)