FREEIPMI(5) Configuration FREEIPMI(5)

NAME freeipmi.conf - specify default values to FreeIPMI

DESCRIPTION The FreeIPMI configuration file can be used to set alternate default values to many FreeIPMI tools so values dont have to be configured on the command line. This allows users to avoid typing in a long list of command line options everytime a command is executed. It can also be used to hide usernames, passwords, and other sensitive information from the ps(1) command.

Currently, the tools that can be configured with the configuration file are: bmc-config(8), bmc-device(8), bmc-info(8), bmc-watchdog(8), ipmi- chassis(8), ipmi-chassis-config(8), ipmi-fru(8), ipmi-oem(8), ipmi- raw(8), ipmi-sel(8), ipmi-sensors(8), ipmi-sensors-config(8), ipmicon- sole(8), ipmimonitoring(8), ipmipower(8), and pef-config(8).

By default, the configuration file is stored at /etc/freeipmi.conf. But users may select a different configuration file at the command line with the --config-file option.

Values specified on the command line override the configuration values specified in the configuration file.

FORMAT The configuration options that can be specified in the configuration file are listed below. Each configuration option must be listed on a separate line. Arguments for an option are separated by any amount of whitespace. Multiple arguments are also separated by whitespace. Com- ments can be marked by using the pound sign ("#") character, and lines can be continued on the next using backslash ("

Note that it is possible to list the username, password and other potentially sensitive information in the configuration file. If this data is stored in a configuration file, system administrators should limit access to this file.

GENERAL OPTIONS The following options are options generally available to all tools, although specific options may be ignored by some. (For example, ipmi- console(8) and ipmipower(8) do not perform in-band communication, therefore they would ignore in-band communication options. Similarly bmc-watchdog(8) does not perform out-of-band communication, therefore it would ignore all out-of-band options).

driver-type IPMIDRIVER Specify the default driver type to use.

disable-auto-probe ENABLE|DISABLE Specify if IPMI devices should be probed for default settings.

driver-address DRIVER-ADDRESS Specify the default in-band driver address to use.

driver-device DEVICE Specify the default in-band driver device path to use.

register-spacing REGISTER-SPACING Specify the default in-band driver registerspacing to use.

username USERNAME Specify the default username to use.

password PASSWORD Specify the default password to use.

k_g str Specify the default BMC key (K_g) to use. Prefix with 0x to enter the key in hex.

session-timeout MILLISECONDS Specify the default session timeout length to use in millisec- onds.

retransmission-timeout MILLISECONDS Specify the default retransmission timeout length to use in mil- liseconds.

authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use. The following privi- lege levels are supported: USER, OPERATOR, ADMIN.

workaround-flags WORKAROUNDS Specify default workaround flags to use. Multiple workarounds can be specified separated by whitespace. Please see tool man- pages for details about available workarounds for each tool. The following workarounds are supported: idzero, forcepermsg, unex- pectedauth, endianseq, authcap, solpayloadsize, solport, intel20, supermicro20, sun20.

SDR OPTIONS The following options are specific to tools that use the sensor data repository (SDR). They will be ignored by all other tools.

quiet-cache ENABLE|DISABLE Specify if cache creation/deletion information should not be output by default.

sdr-cache-directory DIRECTORY Specify the default sdr cache directory to use.

HOSTRANGED OPTIONS The following options are specific to tools that support hostranged output. They will be ignored by all other tools.

buffer-output ENABLE|DISABLE Specify if hostranged output should be buffered by default.

consolidate-output ENABLE|DISABLE Specify if hostranged output should be consolidated by default.

fanout COUNT Specify the default multiple host fanout to use.

eliminate ENABLE|DISABLE Specify if undetected hosts should be eliminated by default.

always-prefix ENABLE|DISABLE Specify if output should be always prefixed by default.

BMC-CONFIG OPTIONS The following options are specific to bmc-config(8). They will be ignored by other tools.

bmc-config-username USERNAME Specify the default username to use for bmc-config(8). If spec- ified, will override the general option username above.

bmc-config-password PASSWORD Specify the default password to use for bmc-config(8). If spec- ified, will override the general option password above.

bmc-config-k_g str Specify the default BMC key (K_g) to use for bmc-config(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

bmc-config-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for bmc-con- fig(8). If specified, will override the general option authen- tication-type above. The following authentication types are sup- ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

bmc-config-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for bmc-config(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

bmc-config-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for bmc-config(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

bmc-config-workaround-flags WORKAROUNDS Specify default workaround flags to use for bmc-config(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see bmc-config(8) manpage for available workarounds.

BMC-DEVICE OPTIONS The following options are specific to bmc-device(8). They will be ignored by other tools.

bmc-device-username USERNAME Specify the default username to use for bmc-device(8). If spec- ified, will override the general option username above.

bmc-device-password PASSWORD Specify the default password to use for bmc-device(8). If spec- ified, will override the general option password above.

bmc-device-k_g str Specify the default BMC key (K_g) to use for bmc-device(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

bmc-device-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for bmc- device(8). If specified, will override the general option authentication-type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

bmc-device-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for bmc-device(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

bmc-device-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for bmc-device(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

bmc-device-workaround-flags WORKAROUNDS Specify default workaround flags to use for bmc-device(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see bmc-device(8) manpage for available workarounds.

BMC-INFO OPTIONS The following options are specific to bmc-info(8). They will be ignored by other tools.

bmc-info-username USERNAME Specify the default username to use for bmc-info(8). If speci- fied, will override the general option username above.

bmc-info-password PASSWORD Specify the default password to use for bmc-info(8). If speci- fied, will override the general option password above.

bmc-info-k_g str Specify the default BMC key (K_g) to use for bmc-info(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

bmc-info-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for bmc-info(8). If specified, will override the general option authentication- type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

bmc-info-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for bmc-info(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

bmc-info-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for bmc-info(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

bmc-info-workaround-flags WORKAROUNDS Specify default workaround flags to use for bmc-info(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see bmc-info(8) manpage for available workarounds.

BMC-WATCHDOG OPTIONS The following options are specific to bmc-watchdog(8). They will be ignored by other tools.

bmc-watchdog-workaround-flags WORKAROUNDS Specify default workaround flags to use for bmc-watchdog(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see bmc-watchdog(8) manpage for available workarounds.

bmc-watchdog-logfile FILE Specify the default logfile.

bmc-watchdog-no-logging ENABLE|DISABLE Specify if logging will be disabled by default.

IPMI-CHASSIS OPTIONS The following options are specific to ipmi-chassis(8). They will be ignored by other tools.

ipmi-chassis-username USERNAME Specify the default username to use for ipmi-chassis(8). If specified, will override the general option username above.

ipmi-chassis-password PASSWORD Specify the default password to use for ipmi-chassis(8). If specified, will override the general option password above.

ipmi-chassis-k_g str Specify the default BMC key (K_g) to use for ipmi-chassis(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-chassis-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-chas- sis(8). If specified, will override the general option authen- tication-type above. The following authentication types are sup- ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-chassis-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-chassis(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-chassis-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-chassis(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmi-chassis-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-chassis(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-chassis(8) manpage for available workarounds.

IPMI-CHASSIS-CONFIG OPTIONS The following options are specific to ipmi-chassis-config(8). They will be ignored by other tools.

ipmi-chassis-config-username USERNAME Specify the default username to use for ipmi-chassis-config(8). If specified, will override the general option username above.

ipmi-chassis-config-password PASSWORD Specify the default password to use for ipmi-chassis-config(8). If specified, will override the general option password above.

ipmi-chassis-config-k_g str Specify the default BMC key (K_g) to use for ipmi-chassis-con- fig(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-chassis-config-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-chassis- config(8). If specified, will override the general option authentication-type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-chassis-config-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-chassis-con- fig(8). If specified, will override the general option cipher- suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-chassis-config-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-chassis-con- fig(8). If specified, will override the general option privi- lege-level above. The following privilege levels are supported: USER, OPERATOR, ADMIN.

ipmi-chassis-config-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-chassis-con- fig(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-chassis-config(8) man- page for available workarounds.

IPMI-FRU OPTIONS The following options are specific to ipmi-fru(8). They will be ignored by other tools.

ipmi-fru-username USERNAME Specify the default username to use for ipmi-fru(8). If speci- fied, will override the general option username above.

ipmi-fru-password PASSWORD Specify the default password to use for ipmi-fru(8). If speci- fied, will override the general option password above.

ipmi-fru-k_g str Specify the default BMC key (K_g) to use for ipmi-fru(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-fru-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-fru(8). If specified, will override the general option authentication- type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-fru-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-fru(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-fru-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-fru(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmi-fru-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-fru(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-fru(8) manpage for available workarounds.

ipmi-fru-skip-checks ENABLE|DISABLE Specify if checksum checks will be skipped by default.

IPMI-OEM OPTIONS The following options are specific to ipmi-oem(8). They will be ignored by other tools.

ipmi-oem-username USERNAME Specify the default username to use for ipmi-oem(8). If speci- fied, will override the general option username above.

ipmi-oem-password PASSWORD Specify the default password to use for ipmi-oem(8). If speci- fied, will override the general option password above.

ipmi-oem-k_g str Specify the default BMC key (K_g) to use for ipmi-oem(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-oem-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-oem(8). If specified, will override the general option authentication- type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-oem-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-oem(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-oem-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-oem(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmi-oem-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-oem(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-oem(8) manpage for available workarounds.

IPMI-RAW OPTIONS The following options are specific to ipmi-raw(8). They will be ignored by other tools.

ipmi-raw-username USERNAME Specify the default username to use for ipmi-raw(8). If speci- fied, will override the general option username above.

ipmi-raw-password PASSWORD Specify the default password to use for ipmi-raw(8). If speci- fied, will override the general option password above.

ipmi-raw-k_g str Specify the default BMC key (K_g) to use for ipmi-raw(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-raw-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-raw(8). If specified, will override the general option authentication- type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-raw-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-raw(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-raw-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-raw(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmi-raw-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-raw(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-raw(8) manpage for available workarounds.

IPMI-SEL OPTIONS The following options are specific to ipmi-sel(8). They will be ignored by other tools.

ipmi-sel-username USERNAME Specify the default username to use for ipmi-sel(8). If speci- fied, will override the general option username above.

ipmi-sel-password PASSWORD Specify the default password to use for ipmi-sel(8). If speci- fied, will override the general option password above.

ipmi-sel-k_g str Specify the default BMC key (K_g) to use for ipmi-sel(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-sel-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-sel(8). If specified, will override the general option authentication- type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-sel-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-sel(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-sel-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-sel(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmi-sel-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-sel(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-sel(8) manpage for available workarounds.

IPMI-SENSORS OPTIONS The following options are specific to ipmi-sensors(8). They will be ignored by other tools.

ipmi-sensors-username USERNAME Specify the default username to use for ipmi-sensors(8). If specified, will override the general option username above.

ipmi-sensors-password PASSWORD Specify the default password to use for ipmi-sensors(8). If specified, will override the general option password above.

ipmi-sensors-k_g str Specify the default BMC key (K_g) to use for ipmi-sensors(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-sensors-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-sen- sors(8). If specified, will override the general option authentication-type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-sensors-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-sensors(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-sensors-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-sensors(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmi-sensors-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-sensors(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-sensors(8) manpage for available workarounds.

ipmi-sensors-quiet-readings ENABLE|DISABLE Specify if sensor reading values and thresholds should not be output by default.

ipmi-sensors-groups GROUP-LIST Specify default groups to show sensor outputs for. Multiple groups can be specified separated by whitespace. Please run ipmi-sensors(8) s --list-groups option to see possible groups.

ipmi-sensors-bridge-sensors ENABLE|DISABLE Specify if non-BMC sensors should be bridged by default or not.

IPMI-SENSORS-CONFIG OPTIONS The following options are specific to ipmi-sensors-config(8). They will be ignored by other tools.

ipmi-sensors-config-username USERNAME Specify the default username to use for ipmi-sensors-config(8). If specified, will override the general option username above.

ipmi-sensors-config-password PASSWORD Specify the default password to use for ipmi-sensors-config(8). If specified, will override the general option password above.

ipmi-sensors-config-k_g str Specify the default BMC key (K_g) to use for ipmi-sensors-con- fig(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmi-sensors-config-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmi-sensors- config(8). If specified, will override the general option authentication-type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-sensors-config-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmi-sensors-con- fig(8). If specified, will override the general option cipher- suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-sensors-config-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmi-sensors-con- fig(8). If specified, will override the general option privi- lege-level above. The following privilege levels are supported: USER, OPERATOR, ADMIN.

ipmi-sensors-config-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmi-sensors-con- fig(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmi-sensors-config(8) man- page for available workarounds.

IPMICONSOLE OPTIONS The following options are specific to ipmiconsole(8). They will be ignored by other tools.

ipmiconsole-username USERNAME Specify the default username to use for ipmiconsole(8). If specified, will override the general option username above.

ipmiconsole-password PASSWORD Specify the default password to use for ipmiconsole(8). If specified, will override the general option password above.

ipmiconsole-k_g str Specify the default BMC key (K_g) to use for ipmiconsole(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmiconsole-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmicon- sole(8). If specified, will override the general option authen- tication-type above. The following authentication types are sup- ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmiconsole-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmiconsole(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmiconsole-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmiconsole(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmiconsole-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmiconsole(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmiconsole(8) manpage for available workarounds.

ipmiconsole-escape-char CHAR Specify the default escape character.

ipmiconsole-dont-steal ENABLE|DISABLE Specify if in use SOL sessions should not be stolen by default.

ipmiconsole-lock-memory ENABLE|DISABLE Specify if memory should be locked by default.

IPMIMONITORING OPTIONS The following options are specific to ipmimonitoring(8). They will be ignored by other tools.

ipmimonitoring-username USERNAME Specify the default username to use for ipmimonitoring(8). If specified, will override the general option username above.

ipmimonitoring-password PASSWORD Specify the default password to use for ipmimonitoring(8). If specified, will override the general option password above.

ipmimonitoring-k_g str Specify the default BMC key (K_g) to use for ipmimonitoring(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmimonitoring-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmimonitor- ing(8). If specified, will override the general option authentication-type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmimonitoring-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmimonitor- ing(8). If specified, will override the general option cipher- suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmimonitoring-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmimonitoring(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmimonitoring-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmimonitoring(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmimonitoring(8) manpage for available workarounds.

ipmimonitoring-quiet-readings ENABLE|DISABLE Specify if sensor reading values and thresholds should not be output by default.

ipmimonitoring-groups GROUP-LIST Specify default groups to show sensor outputs for. Multiple groups can be specified separated by whitespace. Please run ipmimonitoring(8) s --list-groups option to see possible groups.

ipmimonitoring-bridge-sensors ENABLE|DISABLE Specify if non-BMC sensors should be bridged by default or not.

ipmimonitoring-sensor-config-file FILE Specify the default sensor configuration file.

IPMIPOWER OPTIONS The following options are specific to ipmipower(8). They will be ignored by other tools.

ipmipower-username USERNAME Specify the default username to use for ipmipower(8). If speci- fied, will override the general option username above.

ipmipower-password PASSWORD Specify the default password to use for ipmipower(8). If speci- fied, will override the general option password above.

ipmipower-k_g str Specify the default BMC key (K_g) to use for ipmipower(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

ipmipower-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for ipmipower(8). If specified, will override the general option authentication- type above. The following authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmipower-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for ipmipower(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmipower-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for ipmipower(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

ipmipower-workaround-flags WORKAROUNDS Specify default workaround flags to use for ipmipower(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see ipmipower(8) manpage for available workarounds.

ipmipower-on-if-off ENABLE|DISABLE Specify if on-if-off functionality is enabled or disabled by default.

ipmipower-wait-until-on ENABLE|DISABLE Specify if wait-until-on functionality is enabled or disabled by default.

ipmipower-wait-until-off ENABLE|DISABLE Specify if wait-until-off functionality is enabled or disabled by default.

ipmipower-retransmission-wait-timeout MILLISECONDS Specify the default retransmission wait timeout length to use in milliseconds.

ipmipower-retransmission-backoff-count COUNT Specify the default retransmission backoff count to use for retransmissions.

ipmipower-ping-interval MILLISECONDS Specify the default ping interval length to use in milliseconds.

ipmipower-ping-timeout MILLISECONDS Specify the default ping timeout length to use in milliseconds.

ipmipower-ping-packet-count COUNT Specify the default ping packet count size to use.

ipmipower-ping-percent PERCENT Specify the default ping percent value to use.

ipmipower-ping-consec-count COUNT Specify the default ping consecutive count value to use.

PEF-CONFIG OPTIONS The following options are specific to pef-config(8). They will be ignored by other tools.

pef-config-username USERNAME Specify the default username to use for pef-config(8). If spec- ified, will override the general option username above.

pef-config-password PASSWORD Specify the default password to use for pef-config(8). If spec- ified, will override the general option password above.

pef-config-k_g str Specify the default BMC key (K_g) to use for pef-config(8). If specified, will override the general option k_g above. Prefix with 0x to enter the key in hex.

pef-config-authentication-type AUTHENTICATION-TYPE Specify the default authentication type to use for pef-con- fig(8). If specified, will override the general option authen- tication-type above. The following authentication types are sup- ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

pef-config-cipher-suite-id CIPHER-SUITE-ID Specify the default cipher suite id to use for pef-config(8). If specified, will override the general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

pef-config-privilege-level PRIVILEGE-LEVEL Specify the default privilege type to use for pef-config(8). If specified, will override the general option privilege-level above. The following privilege levels are supported: USER, OPER- ATOR, ADMIN.

pef-config-workaround-flags WORKAROUNDS Specify default workaround flags to use for pef-config(8). If specified, will override the general options workaround-flags above. Multiple workarounds can be specified separated by whitespace. Please see pef-config(8) manpage for available workarounds.

FILES /etc/freeipmi.conf

REPORTING BUGS Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

COPYRIGHT Copyright © 2003-2008 FreeIPMI Core Team.

FreeIPMI is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

SEE ALSO freeipmi(7), bmc-config(8), bmc-device(8), bmc-info(8), bmc-watch- dog(8), ipmi-chassis(8), ipmi-fru(8), ipmi-oem(8), ipmi-raw(8), ipmi- sel(8), ipmi-sensors(8), ipmi-sensors-config(8), ipmiconsole(8), ipmi- monitoring(8), ipmipower(8), pef-config(8)

http://www.gnu.org/software/freeipmi/

FreeIPMI 0.7.16 2010-05-03 FREEIPMI(5)