NAME dcbtool - manage the Data Center Bridging (DCB) settings of a DCB interface
SYNOPSIS dcbtool -h dcbtool -v dcbtool [-rR] dcbtool [-rR] [command] [command arguments]
DESCRIPTION dcbtool is used to query and set the DCB settings of a DCB capable Eth- ernet interface. It connects to the client interface of lldpad to per- form these operations. dcbtool will operate in interactive mode if it is executed without a command. In interactive mode, dcbtool also func- tions as an event listener and will print out events received from lld- pad as they arrive.
OPTIONS -h show the dcbtool usage message
-v shows dcbtool version information
-r display the raw lldpad client interface messages as well as the readable output.
-R display only the raw lldpad client interface messages
COMMANDS help shows the dcbtool usage message
ping test command. lldpad responds with "PPONG" if the client inter- face is operational.
license displays dcbtool license information
quit exit from interactive mode
The following commands interact with lldpad to manage the daemon and DCB features on DCB capable interfaces.
dcbtool general configuration commands:
<gc|go> dcbx get the configured or operational version of the DCB capabili- ties exchange protocol. If different, the configured version will take effect (and become the operational version) after lld- pad is restarted.
sc dcbx v:[1|2] set the version of the DCB capabilities exchange protocol which will be used the next time lldpad is started. Information about version 1 can be found at: <http://download.intel.com/technology/eedc/dcb_cep_spec.pdf> Information about version 2 can be found at: <http://www.ieee802.org/1/files/public/docs2008/az-wadekar-dcbx- capability-exchange-discovery-protocol-1108-v1.01.pdf>
DCB per-interface commands:
gc <ifname> <feature> get configuration of feature on interface ifname.
go <ifname> <feature> get operational status of feature on interface ifname.
gp <ifname> <feature> get peer configuration of feature on interface ifname.
sc <ifname> <feature> <args> set the configuration of feature on interface ifname.
feature may be one of the following:
dcb DCB state of the port
pg priority groups
pfc priority flow control
app:<subtype> application specific data
ll:<subtype> logical link status
subtype can be:
0|fcoe Fiber Channel over Ethernet (FCoE)
args can include:
e:<0|1> controls feature enable
a:<0|1> controls whether the feature is advertised via DCBX to the peer
w:<0|1> controls whether the feature is willing to change its opera- tional configuration based on what is received from the peer
[feature specific args] arguments specific to a DCB feature
Feature specific arguments for dcb:
on|off enable or disable DCB for the interface. The go and gp commands are not needed for the dcb feature. Also, the enable(e), adver- tise(a) and willing(w) arguments are not required.
Feature specific arguments for pg:
pgid:xxxxxxxx Priority group ID for the 8 priorities. From left to right (priorities 0-7), x is the corresponding priority group ID value, which can be 0-7 for priority groups with bandwidth allo- cations or f (priority group ID 15) for the unrestricted prior- ity group.
pgpct:x,x,x,x,x,x,x,x Priority group percentage of link bandwidth. From left to right (priority groups 0-7), x is the percentage of link bandwidth allocated to the corresponding priority group. The total band- width must equal 100%.
uppct:x,x,x,x,x,x,x,x Priority percentage of priority group bandwidth. From left to right (priorities 0-7), x is the percentage of priority group bandwidth allocated to the corresponding priority. The sum of percentages for priorities which belong to the same priority group must total 100% (except for priority group 15).
strict:xxxxxxxx Strict priority setting. From left to right (priorities 0-7), x is 0 or 1. 1 indicates that the priority may utilize all of the bandwidth allocated to its priority group.
up2tc:xxxxxxxx Priority to traffic class mapping. From left to right (priori- ties 0-7), x is the traffic class (0-7) to which the priority is mapped.
Feature specific arguments for pfc:
pfcup:xxxxxxxx Enable/disable priority flow control. From left to right (pri- orities 0-7), x is 0 or 1. 1 indicates that the corresponding priority is configured to transmit priority pause.
Feature specific arguments for app:<subtype>:
appcfg:xx xx is a hexadecimal value representing an 8 bit bitmap where 1 bits indicate the priorities which frames for the applications specified by subtype should use. The lowest order bit maps to priority 0.
Feature specific arguments for ll:<subtype>:
status:[0|1] For testing purposes, the logical link status may be set to 0 or 1. This setting is not persisted in the configuration file.
EXAMPLES Enable DCB on interface eth2
dcbtool sc eth2 dcb on
Assign priorites 0-3 to priority group 0, priorites 4-6 to priority group 1 and priority 7 to the unrestricted priority. Also, allocate 25% of link bandwidth to priority group 0 and 75% to group 1.
dcbtool sc eth2 pg pgid:0000111f pgpct:25,75,0,0,0,0,0,0
Enable transmit of Priority Flow Control for priority 3 and assign FCoE to priority 3.
dcbtool sc eth2 pfc pfcup:00010000 dcbtool sc eth2 app:0 appcfg:08
COPYRIGHT dcbtool - DCB configuration utility Copyright(c) 2007-2010 Intel Corporation. Portions of dcbtool are based on:
Copyright (c) 2004-2008, Jouni Malinen <email@example.com>
LICENSE This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, ver- sion 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in the file called "COPYING".
SUPPORT Contact Information: e1000-eedc Mailing List <firstname.lastname@example.org- forge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
June 29, 2009 dcbtool(8)